General description: 30" x 58" Baked enamel restroom partition door
Brand: Accurate Partitions
Weight and freight class: 43 lbs, ships via truck,
  FOB Lyons, IL 60534.
  Note: Before placing your order, Visit the 'Delivery and Payment
  Terms' section of our 'Customer Service' page, paragraphs
  'Returns and Order Cancellations' and 'Tips for Receiving
  your order'
Application: Allows access to a bathroom partition stall.
  This size is considered non-ADA, and is usually set to swing in,
  though it can be set to swing out as well. The adjustment for
  this is made at the lower hinge, which can also be adjusted so
  that the door remains slightly open to indicate vacancy.
General lead time: 3-4 weeks for standard colors.
  Call ahead for lead time during summer months and for
  special colors, as it may increase.
Warranty: Accurate Partitions guarantees it's powder coated
  steel partitions, properly maintained, against chipping, flaking,
  cracking or discoloration, for 3 years from the date of receipt
  by the customer. If material is found defective during that
  period, the material shall be replaced free of charge.
  No credits or allowances shall be issued for any labor or
  expenses relating to the replacement of components covered
  under the warranty plan. This warranty shall not be applicable
  if vandalism or improper cleaning/maintenance of partitions
  has contributed as just cause for partition failure.
Construction features:
- Spring loaded bottom hinge supplements gravity
  and allows return of door to desired position
- Brazed/welded corners
- Upper and lower door brackets are an integral part of the door.
  A pin goes through the door and upper bracket for a three-point
  bearing and operates in a nylon bushing in the top hinge.
- Honeycomb core, deadens sound and provides impact protection
- Tamper resistant fasteners
Material: 22 gauge galvannealed steel bonded to a
  sound deadening honeycomb core
Finish: Epoxy/polyester powder, electro statically applied,
  fuse bonded and radiantly baked onto the steel
Overall dimensions
  Width: 29-19/32" (just under 29-5/8")
  Height: 58"
  Thickness: 1"
Style: Round edge
Hardware provided:
- Style: Wrap around hinges and concealed turn knob
- Material:
  Hinges, strike/keeper, turn knob and bumper hook:
    Chrome plated zamak
  Escutcheon plate: Part chrome plated zamak, part steel
  Upper hinge bushing: White nylon
  Upper hinge pin: Aluminum
  Upper hinge pin clip: Steel
  Nuts and bolts: Chrome plated steel
- Pieces provided:
  1 Each TP-AC02 top hinge
  1 Each 50-3986600 top hinge bushing
  1 Each TP AC14 top hinge pin with clip
  1 Each TP AC01 bottom hinge
  1 Each TP AC09 turn knob, escutcheon plate and
    slide bolt (bolt comes already inside door)
  1 Each TP 2821ML Bumper coat hook
  6 Each 50-3260700 Torx bolts, 1-1/4" long,
    for hinges and strike/keeper
  6 Each 50-3980690 Torx barrel nuts, 5/8" long, for Torx bolts
  3 Each 50-3910170 #10 x 3/4" Torx sheet metal screws for coat hook
  1 Each TP AC10 Strike/keeper
  1 Each TP AC12 Locking bolt
Things to specify when ordering:
- Color
- If the door or it's strike/keeper is being mounted to
  something other than a standard 1-1/4", round edge pilaster
  (ie, the wall or a 1-1/2" marble pilaster), as special
  hardware is required and may incur an up charge.
Feel free to visit www.accuratepartitions.com to view color charts,
  options and features, material descriptions and specifications,
  installation instructions, care and maintenance and more.

Write a review today! » login required

Headline For example:
"I would buy this product again and again"
"Too much whiz and not enough bang"

Rating

Comments

Nickname

Location