Material
  Casing: Rust resistant steel
  Dial: High impact plastic
Front face with dial
  Height: 2-29/32"
  Width: 1-7/8"
  Depth
    Casing only: 5/16"
    Including dial: 1-1/16"
  Dial
    Outside dia: 1-9/16"
    Nose
      Dia at front: 1"
      Where it meets dial: 1-1/8"
      Depth: 5/8"
Mounting bolts - coming off the back of the front casing,
  one at the top and one at the bottom:
    Bolt size: 1-24
    Thread length: 1/2"
    Bolt to bolt OC: 2-3/16"
Back casing
  Height
    Including mounting tabs: 2-11/16"
    Not including mounting tabs: 1-2/32"
  Width
    Including locking bolt: 2-5/16"
    Not including locking bolt: 2"
Mounting tabs
  Height: 17/32"
  Width: 1-1/2"
  Thickness: 1/16"
  Mounting holes
    Qty: 2, 1 on top tab, 1 on bottom
    Tab dia: 7/32"
    Hole to hole OC: 2-3/16"
  Mounting nuts (included)
    Qty:2
    Type: 10-24 Hex head serrated flange nut (has serrations on its
    underside to give 'bite')
    Hex size: 3/8"
Locking bolt - projects out of the side of the back casing
  Height: 3/4"
  Depth: 7/32" with (extension out of the casing): 5/16"
Combination push buttton - located in the center back of the casing
  Dia: 7/16"
  Depth of extention out of the casing: 1/16"
Control charts are provided with each lock order,
  both on paper and CD

Write a review today! » login required

Headline For example:
"I would buy this product again and again"
"Too much whiz and not enough bang"

Rating

Comments

Nickname

Location