Material: Forged steel (stronger than stamped steel)
Mounting bracket - a flat plate in the shape of a 'T'
  Thickness: 9/32"
  Width
    At horizontal top of 'T': 4"
    At vertical stem of 'T': 1-3/4"
  Mounting holes
    Hole type: Countersunk
    Dia: 9/32"
    Qty: 6 Each total
    - 2 Each rows of 2 holes on top horizontal part of 'T'
    - 2 Each holes on the vertical part of the 'T',
      one above the other.
    Hole to hole OC
      Horizontal part of 'T'
        Top row: 2-1/8"
        Bottom row: 3-3/8"
      Vertical part of 'T', from bottom to top hole: 13/16"
      From top vertical hole to bottom hirozontal row: 11/16"
  Cush stop
    Material: Forged steel
    Shape: Cylindrical
    Dia: 3/4"
    Length: 9/16"
    There are two holes on the PA shoe in which this stop
      can be placed - one for left hand applications and
      one for right hand applications. They are located in
      a third row of the upper 'T' portion just below the
      second row of mounting holes. The arm is shipped with
      the stop in the left hand hole. There is a removable
      plug in the right hand hole. Hole to hole OC: 2-1/8"
Hold open knob - shaped like a 'T'
  Material: Forged steel
  Dia of round stem: 11/16"
  Post length, up to grip handle (top of 'T'): 1-1/16"
  Grip handle length: 2-1/2"
  Grip handle height: 11/16"
Arms
  Middle arm
    Length, from center to center of swivel points: 11-1/4"
    Width
      At swivel by PA shoe bracket: 1-3/8"
      At swivel by end arm: 15/16"
    Thickness
      At swivel by PA shoe bracket: 5/16"
      At swivel by end arm: 1/4"
  End arm
    Length, from center of hex hole to center of swivel
      at the middle arm: 10"
    Width
      At swivel by middle arm: 15/16"
      At hex hole: 1-1/4"
    Thickness
      At swivel by middle arm: 1/4"
      At hex: 11/32"
    Hex width: 19/32"

Write a review today! » login required

Headline For example:
"I would buy this product again and again"
"Too much whiz and not enough bang"

Rating

Comments

Nickname

Location