Material:
  Body and keeper: Cast brass, US28 satin aluminum finish
  Bumper: Gray, non-marking rubber
  Roller: Stainless steel
  Spring: Steel
Body/holder
  Length
    Including roller: 2-5/16"
    Not including roller: 2-5/32"
  Height
    At front: 1-1/4"
    At back, just before mounting plate: 1-3/4"
  Width: 1-1/16"
  Thickness: 1/8"
Mounting plate
  Width
    At center of top hole: 5/8"
    At bottom holes: 2-13/16"
  Thickness: 3/16"
Mounting holes
  Qty: 3
  Dia: 3/16"
  Type: Countersunk
  Hole to hole OC
    Top hole to bottom hole center line: 2-12"
    Bottom right to bottom left hole: 2-1/8"
  Distance from bottom of mounting plate to center of
    bottom hole: 17/32"
Roller
  Dia: 15/32"
  Width: 5/16"
There is a bumper inside the housing that cushions the strike
    of the keeper
  Dia: 1/2"
  Thickness: 3/16"
Spring
  Dia: 7/16"
  Length: 1-3/16"
  Coil thickness: 1/16"
Strike
  Mounting plate height: 2-1/16"
  Width: 1"
  Thickness: 3/16"
Mounting holes
  Qty: 2
  Dia: 3/16"
  Type: Countersunk
  Hole to hole OC: 1-7/16"
Hook
  Length
    From front of mounting plate: 1-13/16"
    From back of mounting plate: 2"
  Width: 3/8"
  Height of hook: 1/2"
  Just behind hook: 9/32"
Mounting hardware
  Holder
    3 each #10 x 1" oval Phillips head sheet metal screw
    3 each 10-24 x 1-1/4" flat Phillips head sheet metal screw
Strike
  2 each #10 x 1" oval Phillips head sheet metal screw
  2 each plastic anchors"

Write a review today! » login required

Headline For example:
"I would buy this product again and again"
"Too much whiz and not enough bang"

Rating

Comments

Nickname

Location