Woven Wire Stock Size Rooms, 4 Sided 12x12x8 with Roof

Part Number: IEP-00036

• Ships via Special Freight

Pre-packaged standard room kits are quick and easy to order. With convenience and ease of installation, these pre-packaged, standard-sized room kits contain everything needed to put together a specific room design, including one 4-ft. wide x 7-ft. high sliding door with built-in cylinder lock keyed on outside with recessed knob on secured side. Panels are constructed of 10-Ga. wire woven into a 1-1/2 inch diamond pattern. Kits are offered with and without roofs.
Create storage rooms for equipment, records, sensitive documents, IT equipment, and other high-cost items. IEP's woven wire cages are unexcelled where conditions such as ventilation, lighting, vision, and fire-proofed materials are needed.
Each room kit includes bolt-together hardware. Interchangeable panels mount 4-in. from floor and bolt together quickly. Floor shoes, 8-ft. corner channels, and top capping channel are included for added stability. Room kits with ceilings come with ceiling angle in place of top capping channel. All kits include one 4-ft. wide x 7-ft. high sliding door with cylinder lock operated by key outside and recessed knob inside. Sliding door furnished with overhead door track, two trolleys and bottom door guide. Partition and door finish is gray powder coating.
Made of 10-Ga. intermediate-crimp steel wire woven into 1-1/2 inch diamond mesh pattern and securely clinched to C-shaped steel channel framing for superior strength.
Vertical panel framing of 1-1/4 x 5/8 x 1/8-in. cold rolled C-shaped steel channels with 1/4-in. diameter bolt holes spaced not more than 18-in. O.C. along center of framing. Horizontal framing consists of 1 x 1/2 x 1/8-in. cold-rolled steel channels with wire woven through. Top capping bars are 2-1/4 x 1/2 x 1/8-in. cold rolled steel channels.
Features/Benefits:
Security is the owner's expectation and real purchase. Minimum standards and lower cost become meaningless if the wire mesh enclosure fails to secure its contents. Woven wire enclosures made by IEP are built from interchangeable sections, where double crimped-in wires hold mesh securely in diamond shape and prevent any spreading of wire. These panels can not be kicked out, climbed over easily, or manipulated in any way in order to gain access into the secured space. For complete room kits with ceilings, hangar systems or custom framing engineering are not required when you select a safe and secure IEP self-supporting enclosure.
Simplicity of installation saves time and money. IEP's quality and attention to detail assures that wire mesh partition and its components will fit properly and install easily and quickly even by inexperienced labor.