Material: Steel
Finish: USP primed for painting
Height: 4-1/2"
Width: 4-1/2"
Thickness: 3/16"
Knuckles
  Height: 4-27/32"
  Qty of knuckles: 5
  Mounting holes - each outside set of holes is in line with each
      other, and each inside set of holes is inline with each other,
      but the outside holes are offset from the inside holes.
    Qty: 8, 4 per side.
    Vertical OC spacing
      Top outside hole to bottom outside hole OC: 1-1/4"
      Top inside hole to bottom inside hole OC: 3-1/2"
    Horizontal OC spacing
      Left side to right side top or bottom hole OC: 2-71/6"
      Left side to right side middle holes OC: 3-3/4"
Mounting hardware is provided, and includes:
- 24 each 12-24 x 1/2" Phillips flat head machine screws
- 12 each #12 x 1-1/4" Phillips flat head wood screw.

Write a review today! » login required

Headline For example:
"I would buy this product again and again"
"Too much whiz and not enough bang"

Rating

Comments

Nickname

Location