Material: Steel
Finish: US26D satin chromium
Height: 4-1/2"
Width: 4-1/2"
Thickness: 3/16"
Knuckles
  Qty: 5
  Height: 4-23/32"
  Dia: 19/32"
Mounting holes are offset. Each outside set of holes is in line with each other, and each inside set of holes is in line with each other, but the outside holes offset from the inside holes.
  Qty: 8 each, 4 per side
  Vertical OC facing
    Top outside hole to bottom outside hole: 1-1/4"
    Top inside hole to bottom inside hole: 3-1/2"
  Horizontal OC spacing
    Left side to right side top or bottom holes: 2-7/16"
    Left side to right side middle holes: 3-3/4"
Mounting hardware is provided, and includes:
  24 Each 12-24 x 1/2" Phillips flat head machine screws
  12 Each #12 x 1/4" Phillips flat head machine screws

Write a review today! » login required

Headline For example:
"I would buy this product again and again"
"Too much whiz and not enough bang"

Rating

Comments

Nickname

Location