Material
  Inside two-piece bushing: Black nylon
  Outer clamp and shackle: Steel
Inside bushing
  Material thickness
    Under clamp: 1/8"
    On each outer side of clamp: 1/2"
    On outside edges: 1/4"
  Width: 4-1/2"
  Inside dia: 2-3/8"
  Mounting holes
    Qty: 4 each - 1 on each side at the top and 1 on each side at
      the bottom; each pair of holes receives a single through-bolt
    Dia: 1/4"
    Side to side hole to hole OC: 3-1/4"
    There is a flat round area around each bolt hole
      for the bolt head and nut to rest level against.
      Diameter of flat area: 29/32"
    Hardware for mounting bushing to swing set tube (included)
      Qty: 4
      Material: Steel
      Style: 10-24 x 3/4" Hex washer head thread forming screw
      Hex head dia: 5/16"
Outer clamp
  Round portion that wraps around bushing
    Material thickness: 5/16"
    Width: 1-7/8"
    Outside dia: 3-3/8"
  Lower clamping brackets
    Material thickness: 7/16"
    Distance from bottom of round portion
      to center of hole for shackle: 5/8"
Shackle
  Material thickness: 3/8"
  Bolt to bolt OC: 2-1/2"
  Large end
    Inside width: 15/16"
    Inside length, to center of bolt holes: 1-3/16"
    Bolt
      Head
        Style: Round hex with pin
        Outside head dia: 5/8"
        Hex size: 11/32"
      Shoulder: 3/8" x 1-1/4"
      Threads: 3/8-16 x 1/2"
  Small end
    Inside width: 15/32"
    Inside length, to center of bolt holes: 13/16"
    Bolt
      Head
        Style: Round hex with pin
        Outside head dia: 5/8"
        Hex size: 11/32"
      Shouder: 3/8" x 15/16"
      Threads: 3/8-16 x 1/2"

Write a review today! » login required

Headline For example:
"I would buy this product again and again"
"Too much whiz and not enough bang"

Rating

Comments

Nickname

Location