General description: No. 901 Uno-Tred 1-piece rubber stair
tread and riser with raised disc pattern
Brand: R.C. Musson Rubber Co.
Weight: 6.75 lbs
Carton quantity: None
Shipping note: Ships via UPS, FOB Akron, Ohio 44306
Warranty: The R.C. Musson Rubber Co. warrants all rubber stair
treads against excessive wear for a period of five (5) years.
Return policy: This size is special cut from a 72" length and
is therefore not returnable. Other sizes may not be returned
unless written authorization is granted in advance. Items must
then be returned freight prepaid, and a return handling charge
will be assessed. Special size, special run, special color or
custom made material are not returnable.
Material: Molded rubber
Backing finish: Sanded
Style: Part raise circular pattern, part smooth
Nose design: Square nose only
Overall size
Thickness: .16" or 5/32"
Depth: 18.90" (18-29/32")
Length: 36"
Inside nose height: 1.77" (just over 1-3/4")
Depth of Disc pattern: 9.06" (9-1/16")
Depth of smooth rear border: 3.74" (just under 3-3/4")
Riser height when installed: 6.10" (6-3/32")
Discs
Level/tapered: Tapered
Dia: 1.08" (1-5/64")
Raised height off surface: .02"
Application: For commercial use in schools, churches, hotels,
restuarants, theaters, office buildings, apartments, factories
and hospitals.
Federal specification compliances: RR-T-650E, ZZ-T-001237 (GSA-FSS)
Flame Test: Meets requirements of US Uniform Building
for UBC Code Class 1
Recommended adhesives:
- No. 400 Solvent-based Neoprene contact cement
- No. 560 Latex rubber adhesive (not recommended where
excessive moisture exists)
- No. 110 Two-part epoxy nose caulk (for longer wear and
added safety - use with the ECD18 or ECD26 caulking guns)
When ordering, specify:
- Color, from RC Musson's Color Series I, II or III
- If you are butting treads end to end to cover extra wide steps
you must so specify on your order, as exact shade and gauge
cannot be guaranteed.
Color charts and additional product information is available
at www.shifflerequip.com or www.mussonrubber.com