General description: 36" Straight grab bar with peened gripping
  surface, satin finish and 1-1/2" diameter tube
Manufacturer: Bobrick
Shipping information: 2.9 lbs, ships via UPS
Warranty: One (1) year from date of purchase
Bar style: Straight. For mounting horizontally, vertically
  or on the diagonal
Mounting style: Each end of the bar tube is attached to
  an end mounting flange for mounting to the wall.
  Flange comes with a snap-over cover.
Capacity: This grab bar provides 1-1/2" clearance from
  the wall and can support loads in excess of 900 lbs if
  properly installed, complying with barrier-free accessibility
  guidelines for structural strength. Caution: Grab bars are
  no stronger than the anchors and walls to which they are
  attached and, therefore, must be firmly secured in order to
  sustain the loads for which they are intended.
Material
  Grab bar: 18-8 S, 18 gauge, type-304 stainless steel tubing
  Mounting flange: 18-8 S, 1/8" thick, type-304 stainless steel
  Snap flange covers: 18-8 S, 22 gauge, drawn stainless steel
Finish: Satin, with peened gripping surface
Size
  Grab bar portion
    Length
      From center to center of mounting plates: 36"
      From end to end of snap flanges: 39-1/4"
    Inside space
      Length: 34-3/8"
      Depth: 1-1/2"
    Tube dia: 1-1/2"
  Mounting flange
    Shape: Flat sides, rounded ends
    Orientation to the grab bar: When bar is horizontal,
      the flanges are vertical, or at a 'T' with the bar,
      and the holes are one over the other
    Height: 3-1/8"
    Width: 2"
    Thickness: 1/8"
    Depth from back of flange to outside of snap nubs: 5/16"
    Mounting holes
      Qty: 2
      Hole to hole OC: 2-1/4"
  Snap flange cover
    Thickness: 1/32", 22 Gauge
    Outside dia: 3-1/4"
    Depth: 19/32"
ADA Guidelines:
- Grab bar diameter should be 1-1/4" to 1-1/2" with 1-1/2" clearance
  from the wall
- Grab bars should not rotate in their fittings
- The required mounting height is universally 33" to 36" from the
  centerline of the grab bar to the finished floor
- For all Barrier-Free (ADA) toilet compartments, individual toilet
  rooms and guest bathrooms, it is recommended that a 36"
  minimum horizontal grab bar be installed on the back wall over
  the toilet and a 42" minimum horizontal grab bar be installed
  on the side wall or partition nearest the toilet.

Write a review today! » login required

Headline For example:
"I would buy this product again and again"
"Too much whiz and not enough bang"

Rating

Comments

Nickname

Location